Sustainable Architectural in Singapore home.


Along with the homes’ excellent sustainability features, it was recently granted the Green Mark Platinum Award ( BCA ), Singapore’s top accolade for sustainable architecture.

The proprietors of B-House, one of Singapore’s most sustainable contemporary homes, sought to push the boundaries of sustainable design with a private agreement for a two-family bungalow in Bukit Timah.

While Singapore’s green credentials have improved in recent years, there has also been a rise in ecologically friendly projects. This is linked with increased attempts to encourage sustainable design, such as Green Mark accreditation (a state-certified building that is 30% more energy efficient).

Cities are proving to be a sensitive subject for urban planners who advocate for green design principles and smart technologies, according to Chong Fook Loong, head of planning and research at the Singapore Housing development Board (HDB), the government agency responsible for the country’s public housing.

“We see a significant concentration of buildings with adequate natural ventilation and improved interior air quality. To reduce heat gains and losses, new standards for building external surfaces are needed.

As a result, it is critical for residents to have a level head. What these urban planning efforts imply for the rest of Singapore is unknown. In a small nation where 80 percent of the population lives in public housing, gove “nments “commitment to environmentally friendly urban planning has a significant effect.

Bigger green space

There is a growing desire to rethink residential building design and include more and bigger green spaces, improved ventilation, non-contact technology, antimicrobial materials, lightweight materials, and flexible space divisions to adapt spaces to changing requirements.

It is anticipated that architects’ approaches to design will continue to evolve in order to concentrate on sustainability, with an emphasis on providing additional green space and affecting people’s mental health.

While Singapore’s urban skyscrapers are architectural wonders in their own right, what sets them different is their dedication to green efforts. Integrating green areas and interiors into buildings enables Singapore to balance its built environment with the country’s ambitions for garden towns.

The greening of Singapore new condo and existing building stock is a key emphasis of Singapore’s sustainability efforts and is of particular interest to architects and readers alike.

A walk around Singapore’s bustling downtown and the meteoric growth of sustainable architecture – most of it constructed in the last decade – reveals a cool mix of glass, steel, and lush green buildings that combine to create a rich landscape of structural design. A walk through Singapore’s central commercial area demonstrates this tendency vividly.

Architects taking a central role

Architects joined a select group of US journalists earlier this month to examine a handful of such structures and test products, installations, and control systems that can help Singapore take a leadership role in sustainable design and construction.

Addp is a well-known Singapore-based business that specialises in sustainable building and ecologically aware living. To improve the sustainability and comfort of Singapore’s residences, the city state and BCA unveiled a revised set of requirements for new residential structures to earn the green label on Wednesday.

The world’s most amazing green architects, working building after building to preserve the earth habitable. The Singapore prestiges University of Technology and Design (SUTD) is pleased to showcase the outstanding work of its most recent graduating class in December 2020.

The Architecture and Sustainable Design students initiated an architectural research project to address pressing demands at many levels of society, most notably the critical need for housing and stable architectural solutions.

The following are some of the projects produced by the School of Show under the cornerstone of architecture and sustainable design as part of the Singapore University of Technology and Design’s Architecture Master Program. The students in this sample exemplify the intellectual rigour and dedication that characterise SUTD’s theoretical Master of Architecture projects.

Students at famous Singapore University of Technology and Design are studying sustainable design for a better future. These schools’ design-based initiatives demonstrate how they handle problems such as fire resilience, land scarcity, and electricity waste.

The School of Art, Design, filming and Media at Nanyang Technological University creates art out of sustainable structures with steeply sloping roofs and three interconnected blocks. The Oasia Hotel is committed to delivering sustainable urban landscape solutions and includes architectural design that extends beyond rooftop gardens.

This mixed-use public facility, intended to serve Singapore’s ageing population, has a communal square on the bottom level, a health centre in the middle, a light-filled courtyard, and an upper-floor senior citizen’s residence.

Rooftop garden provide energy

The Sky Forest Rooftop, a 242-metre-tall structure, feeds fresh and cold air into its centre, providing air conditioning on all 40 storeys and thus lowering energy usage. The homes generate more energy than they use and also capture the rays of Singapore’s scorching sun through huge rooftop solar panels.

The structure, which was named one of Singapore’s greenest retail and office buildings when it opened in 2011, was designed by Denton Corker Marshall with sustainability in mind.

Plants play a significant role in this design, with green spaces built on each level and in front of the structure. The 37FC, which houses Ong Ong Architecture, is designed in a green manner, both literally and metaphorically.

The first female to lead Singapore’s Urban Development Authority, Kong Koon Hean is credited with reshaping the city’s skyline with famous landmark projects such as the Marina Bay Gardens residences and entertainment district, one of the city’s most famous attractions and the Jurong Lake District.

It is being developed as a second business district and will house a new high-speed rail connection to neighbouring Malaysia.

Sustainable Architectural – Futureproof


According to WWF, $350 trillion will be invested in urban infrastructure by 2050. Using sustainable building materials will go a long way in making urban infrastructure as clean as possible.

Environmentally sustainable building materials make your home ready for a greener future. They reduce pollution, insulate the home, promote energy efficiency, and reduce dependence on unsustainable resources like oil and natural gas. The basic idea behind using sustainable building materials is to build homes that last longer, and long-lasting homes mean lower maintenance costs and less upkeep.

Plain old wood has many advantages over other industrial building materials like concrete and steel. This sustainable building material is slowly finding its way through North America to build whole houses and small buildings. It has been shown to be stronger than steel and has a cylindrical shape.

We are used to using earth, brick, concrete and wood in construction. However, these materials continue to be used in everyday construction, which means the continuous destruction of trees, wood and mining resources to make cement, binding sand, gravel and bricks. For a better world, there is a new process of sustainable and green building materials that are alternatives to what is used in construction today.

With the inevitability of a growing housing crisis and global climate change, it is more important than ever to reduce energy consumption and choose building materials wisely. Green building materials are materials that do not harm the environment during production, use, disposal and recycling.

Sustainable green building reduces energy consumption and reduces the use of natural resources that cause climate change and warming, such as oil and gas. Building a green home reduces carbon emissions and conserves energy, resulting in savings on energy costs.

This is one of the real reasons why recycled steel has become a popular green building material. The same argument applies to any product or material that is durable for construction, one that will last a long time.

A functional building is durable because of the value its occupants place on it: it is more likely to be restored and recovered as components wear out, and it is more likely to function better as the building changes over time, and its inability to adapt to change reduces its life and sound. Recently, there has been an interest in so-called open building systems that attempt to keep components that often need to be updated, wired, and mounted separately in the walls for as long as possible. FAIA Residential architect Peter Pfeiffer is concerned that certain popular building materials such as insulated concrete forms (ICFs) and structurally insulated panels (SIPs) are not sufficient to adapt to changes and needs in the home.

While different builders have different ideas of what constitutes a green building material, there are certain standards that most agree on. We’ve compiled 11 green building materials that offer an alternative to low-impact concrete.

Straw bales are used to make wall frame frames that replace other building materials such as concrete, wood, gypsum plaster, fiberglass and stone. Basing on new research and technology, straw bale buildings are reminiscent of days when houses were built with natural, naturally occurring materials. Sealed straw bales provide a high degree of insulation in hot and cold climates and are not only affordable and sustainable, but also a renewable resource.   

In addition, these materials can be mixed with other building materials. Ash Concrete is an alternative to the use of fly ash and conventional cement. We often use wood as a decorative material, but we also use it in some cases to build our houses.   

Brick is the name we thought of when looking for the best building materials for durable buildings. Not unlike concrete, it is actually a very popular material. Bricks, newspapers and other materials of this kind have been used as insulation to build energy-efficient houses since ancient times.  

Concrete has water-repellent properties like contraction and expansion resistance, which make it a durable construction material. We manufacture prestressed concrete that holds the steel strands in the concrete to increase resistance and strength. Use of lattice bars in concrete renders it a cheap, reliable and durable construction material.   

The material is self-extinguishing and air-purifying while reducing carbon from the atmosphere and making stronger in the process. It is not only natural and biodegradable, but also reduces the building’s operational carbon footprint. Inspired by the circular economy, in which natural resources and waste are used in permanent environmental cycles, the UK-based concept of forming particle board building materials from potatoes enables the regeneration of waste food into sustainable building materials.  

Construction annual consumes about 3 billion tons of raw materials or 40 percent of the global total (Roodman’Lenssen, 1995 ). The use of green buildings materials and products promotes the conservation of dwindling non-renewable resources. In addition, the integration of these materials into construction projects helps to reduce environmental impacts associated with the extraction, transportation, processing, production, installation, re-use, recycling and disposal of these materials.  

We do not want to seek full green certification for our homes as a boast for brokers or show potential buyers the money saved on sustainable home materials.   

With sustainable building materials, you can get money back, keep your house longer, make it more valuable and reduce the harmful impact on the environment. Start with little steps such as switching your light bulbs to more efficient bulbs and see how you can make the house the best materials you can use. Do what is best for the world and the natural world and create your own personal oasis with sustainable building materials.   

In the next page, we will examine five materials on which men rely to build houses, halls, temples and many other types of buildings. This information is based on Lynn Froeschle’s article “Environmental Assessment and Specification of Green Building Materials” in the October issue of Construction Specifiers, a publication produced by members of the Construction Specification Institute (CSI). Depending on project-specific objectives, evaluation of green materials may include evaluation of one or more of the criteria above.

Tips And Tricks on How To Film Buildings, Design And Architectures


Lines and shapes are the most glaring in design and patterns. Landscapes are my favorite playground when I photograph, but I’ve also tried photographing architecture on the ball.

When you’re next to other buildings of similar size, create a contour that draws the eye away from the sky and makes contours visible. Create contrast and emphasize differences between subjects. When creating an image that speaks of the structural qualities of modern architecture, remember to emphasize details such as lines and patterns of modern architecture. Architectural subjects are symmetrical in many cases. In this case, make sure that the image conveys the same symmetry.

It’s all about attention to detail, so stand right in the middle of the building you’re photographing. Photography is light, and the difference between a good shot and a good image comes down to planning and timing. If possible, take the time to observe the subject to get a good idea before you shoot. Take enough time to walk around and look at the sides of a building to discover the area that gives you the best and most unique view of the building.

It’s also a good idea to return to the location several times in different weather conditions to take enough pictures of the building so you can figure out what makes the ultimate shot. As we mentioned earlier, paying attention to weather reports is a good way to ensure the perfect image. When it comes to building photography, your initial instinct may be to take an exterior photo of the entire building in its entirety.

To take a better building photograph, you should strive to find a unique perspective. Instead of trying to fill the entire frame of a large building, the view tells you where the building begins and ends. Instead, try to get closer and focus on a single detail to create abstract architectural photography.

Architectural photography is all about buildings and monuments, whether inside or out. Real estate photography captures the interior and exterior of a building or property. The perspective you choose should take precedence in the field of architectural subject matter.

Architecture is an art, and pretending that photographing a building is easy will result in lackluster architectural shots. The building may look stunning, but if you don’t know how to fit it into your frame, it will look like an average photo. Angled lines are rarely straight, and finding the right light to photograph architecture can be a challenge whether you are shooting modern buildings or old buildings.

In architectural photography, light can create drama, obscure details, and create flattering lines. Creating images that have enough awe to fall into the fine art of architectural photography takes some planning and thought, but there are a few tried and true tricks. Here are a few architectural photography tips that will elevate your photos above candid shots of art buildings.

Shooting is all about finding the right light, whether you want a moody silhouette at night, a long exposure of an old building, or a bright blue sky. A good way to capture a building with a bright sky is to get the exposure right. Overexposed images pull details into the shadows, while underexposed images are good for highlights.

One of the most unique buildings in the world is the Aqua Building in Chicago, designed by Jeanne Gang. The shape of the balcony creates a wave pattern on the sides of the Aqua building, and the color of the glass used in the negative space gives the overall impression of a waterfall cascading down the sides. Straight shots of the building are preferred over zoomed shots to give the full context of the stunt.

Highlight the exterior lighting

This way you can see how the different levels and angles of light affect it. Blue Hour is the time after sunset when the sky has a pink, blue or purple hue and photos of buildings help to highlight the exterior lighting and illuminate the external aspects of the facade. Photos taken during the blue hour make the interior of the building glow.

Long exposures of buildings and architectural features can have a powerful effect. If you want to take a photo of a building or tower and you are far away, your only option is to tilt the camera to capture it. With buildings, the main problem is distortion from the lens and camera.

When it comes to architectural photography, wide-angle, fisheye, and ultra wide-angle lenses are the best options. These types of lenses allow for more dramatic composition and allow you to capture the entire frame of a building in one shot. The image of the sensor is on a plane that is not parallel to the facade of the building, so the perspective creates a straight line as the building approaches the sensor.

Whether you’re an amateur photographer taking a stroll through a new city, a travel blogger wanting to share spectacular sights with his readers, or a professional photographer looking for a new niche, architecture is among us in an age of exciting and diverse subjects. From architectural photographers capturing urban density with drones to the abstract and formal details of lesser-known buildings, architectural photographers show us the nuances of our cities, their rich histories, and their unfathomable futures. These include buildings, bridges, fountains, and even entire cityscapes.

Architecture is the design of buildings and living spaces, it is an art, and it is something that many people enjoy and appreciate. This way, you can capture buildings that exist in the real world as they are being built, rather than capturing them digitally.

One of the best tips for photographing amazing architectural subjects is to take your time. Make sure you have a large block of time in your schedule to photograph each day. Now what you should do is gather the right equipment, scout your location, and create a portfolio that will impress future clients and your friends on social media.

In this article, I’ll share some of the top tips for creative architecture and photography. Along the way, you’ll be on your way to mastering new techniques and becoming a stronger photographer.

How To Film Better as a novice


The Inspire 2, the mother of the mid-range to professional drone series, has a set of professional, high-resolution 5.2K cameras that come standard with the drone and rival other platforms in its price range. These cameras can be detached and replaced with several other mounting devices and support cinema cameras up to a certain weight, making them an adaptable and versatile offering trusted by many today’s best indie filmmakers and documentarians. 

The main ways to enhance high-definition video are lighting, audio, and tripod equipment. To make a video look and feel professional, you need an external microphone and a rotating tripod (we can’t shoot without proper lighting equipment). An external microphone eliminates irreversible ambient noise, lighting equipment highlights the focal point and improves overall image quality, coloring the tripod will prevent your viewers from getting seasick, and you’ll feel like you have a firm grip even if the untrained eye perceives unwanted movement. 

These are just a few examples of how properly positioned equipment and training can elevate your final video product from amateur to professional. Another sure identifier for amateur video productions is the lack of multiple tracking shots. This is an advantage for professional video editors who are self trained and know what is pleasing to the eye, how to arrange shots in certain sequences, eliminate emerging sound, jump cuts and the list goes on.

If you make a lot of videos and are happy with the results, you are not alone. Whether you’re shooting, publishing, recording from memory, or saving, these tips will help you make better videos. 

Over the past year, we’ve shared a lot of great tips for getting started in filmmaking for amateur filmmakers, as well as more advice for those looking to graduate from film school. But there are some basic bits of wisdom that newbies ignore for some reason, and that can significantly delay their progress. Here are five useful film tips you should never disregard, regardless of your previous experience. 

Thanks to technological innovations, anyone can become an amateur filmmaker without breaking the bank with expensive equipment. Smartphones have the ability to record video instantly, and there are many free software systems for editing. 

To distill the difference: As a photographer, for example, you capture an image, expression, brand or idea in an instant. With video, you don’t have a finished product to switch from one to the other. This may seem simple, but many novice photographers hold their smartphone aloft when shooting and switch between vertical and horizontal, depending on what the subject requires. 

Many smartphone camera apps offer this feature, and you can download apps like Cinemagraph Pro (iOS) and Vimage (Android) to try it out for yourself. Cinemagraphs are a cross between videos and photos, but most images are one of two options: semi-still or moving. When you make videos, you construct a series of images to determine viewer reaction. 

When shooting still images, it is possible to change the aperture and shutter speed without consequence. It’s fine to set up the camera and shoot the entire scene from a single angle. But when shooting video, changing the aperture or shutter speed can change the look of your footage. 

It’s difficult to brighten the video without degrading the quality or introducing noise. You can’t transfer the video from the desktop camera to social media, but you can send it to your phone, email, or through file-sharing services. 

To get the best resolution and viewing experience, you should know what to expect from the video specifications of the platform you’re posting to. For this reason, I recommend bookmarking this up-to-date guide to video specifications for social media. The order doesn’t matter, but it’s critical to understand each point. 

You’ll learn things like Facebook recommends video dimensions of 1280×720 for landscape and portrait. Considering that many people work on social networks that don’t enable audio when the user scrolls through your video, you need to be creative in how you frame your message. 

Doing more interviews than you need goes a long way as a regular amateur. Shoot way too many interviews for a typical documentary profile of 7-10 people.

Part of old-school filmmaking is making a movie and releasing it to the public as soon as it’s ready. The biggest mistake filmmakers make is waiting until the film is finished to promote it and build an audience. 

It’s best to watch TV with yourself and the people you love. Let’s face it, no one likes to sit and watch boring videos of cousin Jimmy’s birthday party in drag. 

Not many phones can take great pictures in low light. If you want to take a photo at night, you need to find a light source. We’ve all seen videos where our subject has yellow skin and red devilish eyes, with a super dark background. 

In many cases, we recommend using the phone’s rear camera, even if the phone is on a desk or against a wall. The rear camera has better quality, higher resolution, and offers more features and apps. If you prefer a handheld shot, use the front-facing camera. If you’re shooting in landscape mode, you can usually flip the phone over. 

Most mobile camera apps have an option to enable grid lines. So when you go to the camera settings, you can have a vertical or horizontal grid on the screen for taking photos. The most popular gridding tool is the rule of thirds. If you enable the 3×3 grid in the camera app, you can arrange the subject on one of the vertical thirds lines and use the horizontal line as the horizontal line for the position you want. 

For your next video montage or school project, there are mobile apps that can streamline the video editing process. Basic edits, additions, transitions, titles, and effects are easily accomplished on iOS and Android mobile